Back lights provide sharp silhouettes of objects for edge detection and even illumination of opaque and transparent targets.
Application: Contour/ Outline of objects
If only contours of objects are measured and if the lighting can be positioned underneath the object, the back light is the right choice.
Ring lights provide a uniform even illumination. Sizes to fit all standard microscope objectives. Larger standard sizes ranging from 44 to 348 mm in diameter.
Application: Non-reflecing objects
For standard applications and less demanding objects that, for example, don‘t reflect or don‘t have high requirements concerning the measurement accuracy, the ring illumination is used.
Line lights are available in pretty much any length needed. Standard sizes range from 50 to 466 mm. There are also water-cooled LED line lights, which provide as much intensity as the fibre optic equivalent.
Application: Non-reflecing thin or elongated objects
Thin or elongated objects can also be illuminated by one or more line lights at a greater distance. There are single row, double row and four square line lights configurable for any application.
Coaxial lights only allow reflection from the flat surface into the camera which provides good contrast with glossy objects. Standard sizes range from 25 x 25 mm to 145 x 145 mm.
Application: Spatial shadowing objects
For spatial objects may possibly occur shadow, influencing the results. Coaxial illumination can avoid these shadows by the parallelism of the image rays and light. The shadow will usually be reduced significantly.
Dome or tunnel lights provide non-directional diffused light, which eliminates glares and shadows. Standard dome lights are available in sizes from 44 to 348 mm.
Application: Reflecting objects
Dome or tunnel lighting produces diffuse light, and eliminates interfering reflections, comparable with a cloudy sky.